Welcome to our community

Be apart of something great, join today!

1975 Topps George Brett PSA 10 - How high does this go??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

George_Calfas

Well-known member
Aug 22, 2008
36,264
30
Urbana
6,200+ Brett's graded any only 9 PSA10s.......it has legs left........Bill Dodge does not own a 10 so my money is on his collection.
 

RStadlerASU22

Active member
Jan 2, 2013
8,881
11
I get they are more lenient on vintage and the fraying they feel is factory and not a defect , though it def is tough to say its Gem with the edges. However that back centering would irritate the hell out of me and no way if I'm shelling out 10k is that the quality I'm dropping that cash on that centering esp w the edges

Ryan
 

vwnut13

Active member
Apr 19, 2009
8,004
0
Vermont
How does that card grade a 10? The edges seem rough and check out the centering on the back.


PSA and BGS have different standards. Heck, a PSA 9 can be 90/10 on the back!



PSA 10: 55/45 to 60/40 percent on the front, and 75/25 percent on the reverse.
BGS 10: 50/50 all around on front. 60/40 or better on back

PSA 9: 60/40 to 65/35 or better on the front and 90/10 or better on the reverse.
BGS 9: 55/45 both ways on front. 70/30 or better on back

PSA 8: 65/35 to 70/30 or better on the front and 90/10 or better on the reverse
BGS 8: 60/40 both ways or better on front. 80/20 or better on back

PSA 7: 70/30 to 75/25 or better on the front and 90/10 or better on the back
BGS 7: 65/35 both ways or better on front. 90/10 or better on back

PSA 6: 80/20 or better on the front and 90/10 or better on the reverse
BGS 6: 70/30 both ways or better on front. 95/5 or better on back

PSA 5: 85/15 or better on the front and 90/10 or better on the back
BGS 5: 75/25 both ways or better on front. 95/5 or better on back

PSA 4: 85/15 or better on the front and 90/10 or better on the back
BGS 4: 80/20 both ways or better on front. 100/0 or better on back

PSA 3: 90/10 or better on the front and back
BGS 3: 85/15 both ways or better on front. 100/0 or better on back

PSA 2: 90/10 or better on the front and back
BGS 2: 90/10 both ways or better on front. 100/0 or offcut on back
 
Last edited:

MansGame

Active member
Sep 25, 2009
15,324
20
Dallas, TX
Between the fuzzy left side and the obvious off center on the back, I'm just flat out confused. How the hell...
 

George_Calfas

Well-known member
Aug 22, 2008
36,264
30
Urbana
Modern and Vintage get different treatment and certain sets or issues are treated specially. I assume high grade vintage OPC would really confuse some people.
 

smapdi

Well-known member
Aug 7, 2008
4,397
221
PSA has always ignored 'fuzz' on edges. The cardstock was crude and the cutters weren't sharpened very often. This is an extremely nice card and the edges are solid but with extra fibers hanging off, perfectly normal. In fact, that indicates the card wasn't trimmed or shaved. You should see 1950s OPC hockey. They probably cut the whole print run with a single blade.

1975 is the most competitive set of the decade, one of the most competitive of all post-war sets as far as the Registry goes. With so many 9.25+ sets lacking a Brett 10, not to mention other kinds of collectors, I wouldn't be surprised to see it break $10K. Even now I think it's by far the highest price for a 1970s card in any grade.

Plus, PWCC auctions seem to pull premiums over the same cards sold by other, lesser dealers.
 

vwnut13

Active member
Apr 19, 2009
8,004
0
Vermont
Modern and Vintage get different treatment and certain sets or issues are treated specially. I assume high grade vintage OPC would really confuse some people.


A card is either a 10, or it isn't a 10.


Just because a certain set has certain issues, doesn't mean that those issues should be outright ignored.
 

George_Calfas

Well-known member
Aug 22, 2008
36,264
30
Urbana
A card is either a 10, or it isn't a 10.


Just because a certain set has certain issues, doesn't mean that those issues should be outright ignored.

How do you deal with wire cut cards? Wire cut card edge will never look like a modern card but based upon technology of the time the card may be deemed pristine.
 
Last edited:

RStadlerASU22

Active member
Jan 2, 2013
8,881
11
How do you deal with wire cut cards? Wire cut card edge will never look like a modern card but based upon technology of the time the card may be deemed pristine.

Do you feel the centering on the back is up to par with a 10 ? Forgetting what PSA says with the 75/25 , I'm just curious on your opinion. If you wanted a PSA 10 1975 George Brett , would this be an example you would be good with , esp when laying out 12k? Would you buy the grade or the card?

Just curious as to what you think

Ryan
 

Lancemountain

Active member
Apr 11, 2009
8,313
5
Philadelphia
Yeah I agree I think it's a fantastic card as well.


I think the people that are having issues with it are not used to dealing with cards from this era
 

nosterbor

Well-known member
Jun 20, 2010
6,105
438
Sunny Florida
I remember when I use to open a lot of wax when I was a kid in the mid 60's. Use to get boxes for 25 cents at the 5 and dime after the season was or. They would blast them out. We used to get them just for the gum. after opening a box your pants were full of cardboard fuzzy's. The Brett card is awesome, that fuzzy on the edges is what make's it a 10
 

pootshwan

Member
Jan 26, 2010
923
12
Connecticut
I have always thought some of PSA's biggest customers had the convenience of lenient grading (to put it nicely). PWCC happens to be one of PSA's largest customers. I have a feeling if a 'regular' collector like myself submitted this card it would not come back a 10. Just my opinion. A few customers that I believe get special treatment: PWCC, 4_sharp_corners, probstein123

How does the saying go? Pay for the card not the flip. It's still obviously a beautiful card with near perfect centering on the front.

Being a Frank collector, this card comes to mind: POP 1
NNOF+PSA10.jpg

NNOF+PSA10+BACK.jpg
 

RiceLynnEvans75

Active member
Feb 9, 2010
3,264
3
NOVA
A PSA 10 and a BGS 10 are not the same grade.

Additionally, set standards are great and all, but unless they are actually applied it doesn't really matter.


PSA and BGS have different standards. Heck, a PSA 9 can be 90/10 on the back!



PSA 10: 55/45 to 60/40 percent on the front, and 75/25 percent on the reverse.
BGS 10: 50/50 all around on front. 60/40 or better on back

PSA 9: 60/40 to 65/35 or better on the front and 90/10 or better on the reverse.
BGS 9: 55/45 both ways on front. 70/30 or better on back

PSA 8: 65/35 to 70/30 or better on the front and 90/10 or better on the reverse
BGS 8: 60/40 both ways or better on front. 80/20 or better on back

PSA 7: 70/30 to 75/25 or better on the front and 90/10 or better on the back
BGS 7: 65/35 both ways or better on front. 90/10 or better on back

PSA 6: 80/20 or better on the front and 90/10 or better on the reverse
BGS 6: 70/30 both ways or better on front. 95/5 or better on back

PSA 5: 85/15 or better on the front and 90/10 or better on the back
BGS 5: 75/25 both ways or better on front. 95/5 or better on back

PSA 4: 85/15 or better on the front and 90/10 or better on the back
BGS 4: 80/20 both ways or better on front. 100/0 or better on back

PSA 3: 90/10 or better on the front and back
BGS 3: 85/15 both ways or better on front. 100/0 or better on back

PSA 2: 90/10 or better on the front and back
BGS 2: 90/10 both ways or better on front. 100/0 or offcut on back
 

Latest posts

Top