Anyone have a box that...

[Lancemountain]

Holds cards in top loaders?

Box like this, but one that can hold top loaders like this:

 

[MisterT]

Unless I am missing something in your question, I just use the type of box referred to as a "shoe box". You can get 2 row, 3 row, etc. versions of if.

Here is what I am talking about:

http://www.bcwsupplies.com/cat/trading-card/trading-card-boxes/shoe-storage-box-1600-cards

 

[gt2590]

Sometimes, the companies send out promo cards in wider white cardboard set boxes that can hold Top Loads but you still need to turn them sideways and pad 'em in a bit...

 

[carlitoson]

I’ve thought about this before, but I never tried it out:

You’ll need a large flat piece of cardboard (like the side of a large box). Take the box from your example and unfold it all the way so it’s flat. Lay it on the piece of cardboard and trace around it with a pencil. Now, add a quarter inch around the entire tracing. Cut it out on this new line and fold it up just like the original box.

Would this work? I don’t know, but in my head it seems it would work.

 

[jflan702]

Unless I am missing something in your question, I just use the type of box referred to as a "shoe box". You can get 2 row, 3 row, etc. versions of if.

Here is what I am talking about:

http://www.bcwsupplies.com/cat/trading-card/trading-card-boxes/shoe-storage-box-1600-cards

This^^^^.

I have a few of them and they work great. Unfortunately they will not fit in your card house set up. They do fit nicely on top though.

Good luck.

 

[BiggioBrooks755]

I use 2 and 3 row card boxes

 

[PoseyBuster]

http://www.bcwsupplies.com/cat/trading-card/trading-card-boxes/shoe-storage-box-1600-cards


That's all I use for storage, 2 row boxes.....if you have a 3 row full of base cards it can tend to get heavy, so i stick to the two row shoeboxes. BGS Slabs also fit in it, though you cant put the lid down.

 

[Dazed]

I have not seen a box that will allow a toploader to fit horizontal. Only the shoe box type that have been mentioned.

 

[MisterT]

I have not seen a box that will allow a toploader to fit horizontal. Only the shoe box type that have been mentioned.

Correct. I (apparently we) store them vertically. Not sure why horizontal is necessary.

 

[Tzvih123]

As mentioned above, get the 2/3 row cardboard boxes. The 2-row box that I have has a cover ( There are 2 pieces- the box and the cover), but there might be boxes that don't have a removable cover like regular cardboard boxes.

 

[JoshHamilton]

I just go out in the garage and build a new box

 

[hofmichael]

I have a few that fit toploaders like you are asking about.I believe BCW or Ultra Pro made them.

 

[predatorkj]

I have a few of the regular set boxes that hold cards in top loaders. The ones I have I believe to be made by BCW or some such company. In any case, I'm not even sure they were meant for top loaders but maybe taller or wider cards. Almost like 70's basketball stuff or topps wide vision.